memotho

The same is true for v0.0.2, only this time the board does not take the first reading, and the LEDs do not flash, or pulse after provisioning the board. Here...

Issue is reproducible on v0.0.8. Onboard LEDs are not flashing or pulsing after provisioning the board. Take readings every 5 minutes. Never upload, log locally. Log.txt output. clearing and disabling...

Issue is reproducible on v0.0.7 Same setup as for v0.0.8 Log.txt output. 2021-01-01 00:00:02 [error / 124kB] > missing or corrupt config.py no module named 'config' 2021-01-01 00:00:02 [info /...

Hitting 'RESET' button seems to work the same as running main.py manually.

Please note that my tests may have been impaired by weak wifi signal. I have tested it with a battery pack, and hitting a poke button worked, but otherwise the...

@sjefferson99 Hello, I have tested with destination set to adafruit.io and the result is the same blinking red led.

@sjefferson99 I need to retest, I do not remember, but I tried both logging locally and provisioning to adafruit.io, and the result was the same flashing red led and I...

@sjefferson99 @bmustata Hello, Sorry for the late update. I have enviro indoor working now, the issue was my hotspot password it was either too long and/or had special characters, I...