bcm5719-fw
bcm5719-fw copied to clipboard
meklort
BCM5719 firmware reimplementation
When using a non-default MTU value, the network card resets. Testcase: (1) Configure router to send MTU of 9000 via DHCP (2) Boot to Ubuntu Server 21.04.1 ppc64le (3) Network...
Currently, it's possible for the BMC to request a MAC address equal to the port that it's on. This could allow it to capture input data to the host (but...
I had just flashed your firmware on my first EXP182a (I know it took a long time, there were delays), and it seems to have gone smoothly (I'm guessing that...
As I can see from previous issues, this firmware is also working on the Dell KH08P, though the releases only have binaries for the NICs on the Raptor motherboards (which...
Hello! My system has an old version of this libre firmware installed a little while ago just before the first release was created and thus when fwupd support didnt exist....
I know from real feedback from end users that flashing hardware makes a lot of people nervous. This is going to be specially so for firmware explicitly not from the...
Hi. Thanks for this project. To allow easier rebuilding of the firmware blob, it would be nice if it was possible to compile it using some mainline compiler. My goal...
Various people have asked me about: - BCM5720 support - Support for the BCM5720 host-to-BMC feature - BCM5721 support No idea of @meklort's view but I just wanted to note...
See https://github.com/fwupd/fwupd/issues/6243 and https://github.com/fwupd/fwupd/pull/6572 In some cases, updates from lvfs may not have taken immediately due to the APE not being reset, resulting in a power loss before the update...