medzes

Hi, I think this could be reconsidered. I've done some analysis on the delta between the set of working SD2IEC images and the working KungFuFlash D64/ D81 images. Surprisingly only...

I've had similar sparkling or unstability issues, where it may work better on cold C64s or instead on warm C64s, as well as stability differences using a PLA replacement. For...

I've noticed the SD-card stability on one C64 I have too - I'm not sure what that is either. I have experimented with some firmware modifications to reduce the interrupt...

@penny-bit The CTO should be able to change the frequency a little (I dont know how much but much less than 1%? I've not tried it). It would have both...

Just my 2 cents: if you get the error "No DFU capable USB device available" from dfu-utils on Windows, you probably need to install the USB driver for the ST...

HI all, I've successfully been able to get kernal mode working exactly as skoe documented in his excellent article in KungFuFlash, using the DEVEBOX prototype I have. The tricks needed...

Hi skoe, Thanks for that insight. I guess I could also write and use some handcrafted loops, will take some time to integrate that. Yes, I have also implemented the...

Hi, I've been able to find the time to clean up my code, test it a bit and make it ready for others to check out. You can find the...

Yes, this would be possible, but requires some refactoring of existing code then adding a set of calls like the sd2iec code has. The main issue I see is that...

I think it would be great if SID player functionality could be combined with BackBit's BTT file support. This has SID tunes and screenshots in Koala format which could be...