mediotex

I always checked without a coax. Tried to reset, SNMP access is available, MIB tree is limited to 467 objects. Not sure what MIB can enable it.

``` Error in packet. Reason: noAccess Failed object: SNMPv2-SMI::enterprises.4413.2.2.2.1.9.1.2.1.0 ```

Same error. The MIB tree contains only one enterprises group. ``` ... SNMPv2-SMI::enterprises.4491.2.1.20.1.1.1.1.2 = INTEGER: 3 SNMPv2-SMI::enterprises.4491.2.1.20.1.1.1.1.2 = No more variables left in this MIB View (It is past the...

No, its simple data modem, not EMTA. I tried to check if I can use the 'Cable Haunt' exploit to enable shell, but this modem seems not affected. I didn't...

yes, in all cases I connected to the serial console without a coaxial cable attached.

I have to try.

I tried set `arris.nvm.factory_mode_enabled true`, but this didn't change the situation. The serial console value has been reset to the default state. Can it be firmware function?

Hi, I'm back now and starting the testing. So tried the latest commit, but not works. ``` $ ./bcm2dump -P tm902s -vv dump '192.168.100.1,ARRIS,O9W2Q1BFZP' flash dynnv dynnv2.bin bcm2dump v0.9.8-13-g9fbac27 telnet:...

[dump.log](https://github.com/jclehner/bcm2-utils/files/15278209/dump.log)

Tried new commit: the same result, telnet login failed. ``` $ ./bcm2dump -vv -L io.log dump '192.168.100.1,ARRIS,IRSBXWVM9K' flash dynnv dynnv2.bin bcm2dump v0.9.8-15-g9d0dca2 telnet: received command 253,1 telnet: received command 253,33...