mcer12

This issue also seems to happen on TC2 with vendor waveform. Right at the end of the update, the image fades a bit.

There's definitely a bug (at least with the 4bpp waveforms) as the script doesn't output working header file. 5bpp works but colors are distorted as discussed on slack with screenshots....

@martinberlin holy moly, it's been two years :D I'll see if I can replicate it and will try to make a 60fps video of it, how it behaves. "Just any...

@martinberlin also check slack, there's a relevant discussion about these displays. It's very difficult to get the exact display model you need.

I respectfully disagree :) In my opinion this is a bug of the waveform generator and should be tracked in github issues. What happends on slack can easily be forgotten...

@karwosts you need 2 resistors, 2 transistors to level shift to 5V. You can say it's double the components but you can also say it's just one extra transistor and...

You probably mean STM32F103C6T6, I also have these chips (from aliexpress) and I wasn't able to make this bootloader work. STM32F103C8T6 works fine. Mind that C6T6 is a different -...

Hi, I suspect you're using the new ESP8266 arduino core which is not supported. You have to use 2.7.4 If you want to make it work with version 3.0+ I...

Sorry, if you want me to help, you will have to use this github issue. 1. uninstall ESP8266 completely, then install 2.7.4 again (just to be sure) 2. copy modified...

So you're saying you're using the sketch with totally different hardware? I can't help you with that, sorry. The sketch is intended for SN74141 nixie driver, not for shift registers....