mcer12

Found this digitizer, it's not quite the same size as 6" display but might be interesting since it should be fairly easy to implement. https://www.aliexpress.com/item/32691474609.html

Another thing I found is that ED060XD4 (ED060XC3) should be using Cypress TMA445 touch IC (if you order version with touch). http://www.cypress.com/files/cytma445-truetouch-multi-touch-all-points-touchscreen-controller-datasheetpdf And linux driver, might come handy: http://read.pudn.com/downloads648/sourcecode/embedded/2633827/kernel/drivers/input/touchscreen/cyttsp4_device_access.c__.htm

Adding external PSRAM to WROOM module https://www.reddit.com/r/esp32/comments/j7kxx2/psram_on_wroom/

There is a version of ED097TC2 with touchscreen and backlight, so just throwing it out there. https://www.aliexpress.com/item/1005001268418194.html

@vroland I don't... maybe it's your region. Does it let you order the one I linked?

ED0970D2 seems to be the same as ED097TC2/OC4 but also have digitizer. In this case it looks like the digitizer is analog. No backlight.

Received new pcbs and should also receive the ED060XC3 finally today, it was on the way for what, over two months? lol! So I will do some testing. I dont...

Just managed to make it work! Both ED060XC3 and ED060XD4 work out of the box using ED097TC2 definition in menuconfig. ED060XC3 looks just as good as ED097TC2, same contrast, awesome....

https://imgur.com/a/CPPmDYQ I ramped up VCOM to -2.6V which is pretty high and its much better (it's the one without foil in the image), still lower contrast than ED060XC3 tho (fun...

Yes, the connetor and pinout is the same as XC5, just with pin numbers reversed (!!!). I was searching for XC5 images to see what the usual vcom is and...