mccolister1017

same thing for me anyway

if it can run ubuntu or debian , it can run umbrel you can see the cmd line for the installation on the umbrel website .

> > if it can run ubuntu or debian , it can run umbrel you can see the cmd line for the installation on the umbrel website . > >...

You can now install Umbrel on any hardware that is running Ubuntu or Debian — including any single-board computer (like a RockPro, ODROID, etc.), NUC, laptop/computer, VM, or even a...

> @Jorijn I've root caused the issue to be technically a bug in BTC Pay Server where it does not accept/handle multiple values for x-forwarded headers. Because in this setup...

> @mccolister1017 I have a PR ready to address this, it needs to be reviewed and tested. oh nice thank you

flash the screen too

this is the bl touch version it depend of your motherboard check it on your printer [E3V2-UBL-BLTouch-15x15-v4.2.2-v2.0.1.bin](https://github.com/Jyers/Marlin/releases/download/v2.0.1/E3V2-UBL-BLTouch-15x15-v4.2.2-v2.0.1.bin) and this is the version without BL touch [E3V2-ManualMesh-5x5-v4.2.2-v2.0.1.bin](https://github.com/Jyers/Marlin/releases/download/v2.0.1/E3V2-ManualMesh-5x5-v4.2.2-v2.0.1.bin)

first version if you got a BL Touch installer and the second if there is nothing on your printer like its factory .

> so I can install the E3V2-ManualMesh-5x5-v4.2.2-v2.0.1.bin over the E3V2-Default-v4.2.2-v2.0.1.bin, yes, just the card or do I have to install it on the display? Thank you has been very patient...