Jeff McBride
Jeff McBride
> This is a breaking change. Would that be fine for you? That's fine by me.
Hi folks, I happened to observe your issue, and can tell you that the problem you are seeing is due to changes in the API made in recent releases of...
Thanks @beniroquai! You can definitely use stepper drivers -- in fact that's what I used on the first prototype. The only concern that pops into my head is making sure...
Hi! I used JLCPCB for mine, but I don't really think it should matter much where you get it built. ### Capacitive touch I'm not sure what sort of problems...
Any chance the car magnets are installed backwards? They all need to be aligned, and also there is a "right" polarity based on the gaurd rail current direction. The other...
All with the same polarity, and it cant be arbitrary. One polarity is wrong and if backwards it will move but the guard rails will not contain the car, but...
@jerseyp2 Do you want to try out the change I just merged and let me know if that resolves your issue?
OK. That sounds like something new. I did some dumb hackery to get logging output to a file in the project directory but I've only ever used it on linux,...
I came to file a similar issue, and found this In my case, the issue is that some SVD files have the `access` property on each field of the register,...