Mike

I just discovered the same issue with R1/R3, TH3 and BREEZEPRO decoders. I have a BREEZEPRO device with ID 682330. Until today I had no issue because I was using...

Here is a sample file from the BreezePro device. It tripped the breezepro, th3, and r3 decoders during capture but I couldn't get anything during playback. Perhaps you'll have better...

Good Morning all, In the Meteor receive script, I changed b/w from 288k to 120k for better results. Also output rtl_fm to a raw file (no-extension) instead of pipe directly...

Here are both of my scripts. My code/script baseline is from mid December and I have already tweaked the noaa.conf file to include some things I wanted. I also did...

So the price I pay for being careless when I added some comments to the receiver_meteor.sh script before I posted is a syntax error on the meteor_demod command line. The...

My sincere apologies. I'm not sure what happened here. My NOAA captures today are looking really good but my first two meteor captures of the day aborted for script errors...

Yesterday was a complete bust as I couldn't decode a single packet from any of three meteor passes. This morning I finally got an acceptable pass with the following script:...

IDK but one might assume the env vars $HOME and $USER could be used in the setup script to auto magically configure for the user that is doing the install...

@rustytravis thank you kindly for the script. It made all the necessary changes to replace the default user and I was able to do a partial install. I just wasn't...

I had this issue last evening when out of the blue I received the same error. Turned out the partition I was saving all my files and images to had...