Maksym Romanowski

@roleoroleo do you have any hints? I'd be happy to contribute the correct installation procedure to documentation in the repo.

@roleoroleo thank you for the answer. > Which username and password do you mean? Mqtt server or cam? > But in general you don't need them. I meant MQTT username...

I'm not sure it's the same issue, as I can reproduce it on HAOS 8.4

@agners I am eager to help :) I don't have any experience with OS debugging, but I'll do my best to help. EDIT: I was wrong on this part below:...

@agners now I have some time to assist with this issue if you need some help. I've managed to enable UART and extract logs from version 8.5 64bit, as well...

I found a workaround that worked for me, so the issue is not that important for me anymore. I just flashed HAOS on NVMe and changed the boot priority. Now...

@agners I've verified on 9.0.rc2, but had the same issue as before. And by that time I changed boot priority and flashed 8.5-64 on NVMe. If you need logs from...

Nube question: after the issue is closed, would it be possible to apply this behaviour by default? E.g.: ``` brew_args link:overwrite ```

👍 for `kind: List`

@agners here are my symptoms: I'm using RPI CM4 with eMMC on Waveshare board with NVMe. eMMC is unused due to known issues with NVMe, however after upgrade OS doesn't...