Max Ritter
Max Ritter
I am working on a V3 of the Thermocam, that supports the new Lepton Breakout Board. Stay tuned ;)
@helmarw Thanks! For the Breakout Board V2, you need PCB Version 3.0 and firmware version 3.0 from https://github.com/maxritter/DIY-Thermocam/releases/tag/3.0.0
@cymatics I have answered you via mail ;)
Currently the firmware only supports the resistive version of the screen. But as it is open-source, feel free to add the missing drivers on your own :)
@helmarw The MTP mode is not activated at startup automatically. Instead when the device is turned on and a USB cable is inserted, a prompt on the screen asks the...
> With the latest 3.0.2 firmware, I'm not getting the prompt on Windows 10 (or MacOS). > > Verified that another MTP device (Sony camera) does show up as expected...
@jackattack21 Doing it over the Video Output Module and an IP converter would be possible, although it's not an elegant solution. You may check out the PureThermal 2 from GroupGets...
@Janusz-Janiec Glad to hear the assembly worked and the Thermocam is alive! Thanks for the suggestion. I am already thinking about a DIY-Thermodrone that has a much more compact form...
Hey @Catarallus! For the Lepton Breakout Board V2, you need the PCB 3.0 and the firmware version 3.0. Then the Lepton3.5 will work out-of-the-box and you do not need the...
Hey @Catarallus, do you use the Teensy 4.1 and the firmware loader from [here](https://github.com/maxritter/DIY-Thermocam/tree/master/Software/Firmware%20Updater)? Then it should work, just tried it out myself. Best, Max