matthias1403

Hi, I had the same experience after several hours or a day (Wemos D1 Mini) that the clock stucks. Looking at the serial output it has shown that the program...

I have also clean the flash through Arduino IDE (Erase flash --> all flash contents) and burned the 2.18 (unchanged), than I have to reconfigure everything. But after a day...

Currently I took the bin from github, but I tested also with Core 2.7.4, as the 3.x was not compile clean (something obsolete in httpclient call).

Used a compiled build with 2.5.2 now. Stuck after a day. Attached the serial log. If nobody has this issue this is maybe a HW problem of my sample..... See...

I soldered a new Wemos mini at the display and burned a 2.18 on this untouched device. The behavior is the same again, as it stops running after ~1d. It...