matteocutugno

Hi, Did you fed the antenna with a proper bias-t?

Yes, but you have also to phisically connect a bias-tee, that is a simple three way component useful to fed the active antenna. In the first port you connect the...

Hi, try to add the following lines to your .conf file: Observables.dump=true Observables.dump_filename=./obs.dat Observables.dump_mat=true An then you can open obs.mat with matlab and see if there are at least pseudorange...

Hi It's quite strange that with 7 satellites locked you wasn't able to compute PVT. Try to add in the acquisition block: Acquisition.repeat_satellite=true MC

Hi @nalinsaxenapesu, I shared some data logged with GNSS-SDR. You can find them at https://www.researchgate.net/project/Utilizzo-di-un-ricevitore-software-GNSS-per-il-posizionamento-di-codice They include a working configuration file.

To obtain positions you have to receive at least four complete navigation messages from four different satellites. According to the snapshot you provided you are tracking just three.

Correct. Scarica Outlook per Android ________________________________ From: Nalin Saxena ***@***.***> Sent: Sunday, April 11, 2021 1:48:25 PM To: gnss-sdr/gnss-sdr ***@***.***> Cc: MATTEO CUTUGNO ***@***.***>; Comment ***@***.***> Subject: Re: [gnss-sdr/gnss-sdr] rtl...

Here's an interesting article to use bladeRF for GNSS positioning. https://www.researchgate.net/publication/339417340_Low-Cost_GNSS_Software_Receiver_Performance_Assessment