Mattia Dal Ben

Hello @Jetiaime, as @Chrismelba-Instaclustr already said the Redox Manuform is a handwire project. The Redox PCBs won't fit in the case and can't be used directly.

Hello there @ScomosLastName, I was not aware of this hardware revision. Please contact your seller for support: without knowing how the encoder is connected to the MCU there's nothing I...

Hello @deomareza yes it is. Take a look at [the default keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/yampad/keymaps/default/keymap.c). [Here](https://github.com/qmk/qmk_firmware/blob/d6956668e33ef993d9114a31c0b6c79bebc9ad2c/keyboards/yampad/keymaps/default/keymap.c#L130) you can change the name of the layers displayed on the OLED.

Had issues installing the applet on my card. These instructions fixed the problem, thanks.

Hi there @pintify, thanks for pinging us. Given this is not a common use-case scenario, the fix for this particular issue wasn't scheduled and thus remains a known issue in...

Since we're now working on a *major* release and we can perform breaking changes can we merge this? @MMaiero 3 days ago it was this PR's 5th birthday... we need...

Hi there @alex-kattathra-johnson, there's currently **no active development** (nor I'm planning any) for the hardware. Software is maintened on QMK and ZMK repos. On this repo I'm currently only providing...

Hi there @ellahin, thank you for your contribution! Unfortunately I'm not sure it fits the goal of the current Yampad repo. 1. ZMK firmware doesn't support ATmega32U4-based MCUs (see https://zmk.dev/docs/hardware#pro_micro)...

Hello @konisteel, could this be an issue with the imported unit of measurement? I'm pretty sure I exported the files with metric measurement, if by default your CAD is set...

> other than than any idea which ones will be stacked over each other and which is optional? Why are there same design for 3mm and 2mm @TahuTech might help...