Mattia Dal Ben

> ... to stop having to buy them every 3 weeks > ... one day I decided that one week of battery life was not normal... Just dropping by to...

>I'm also using my own pcb designed based on the redox-w, and fortunately added breakout points for battery. Dropping by just to point out that the redox-w as is does...

Since this solution is really intriguing me I thought of two possible ways to retrofit a booster to the redox-w. ### 1) CR2032 booster through switch pins (`SW_LEFT1`/`SW_RIGHT1`) Since the...

@SimonMerrett Here you go  >The TPS61201 claims 55μA at no load while enabled (we would find it too complicated for a modification board to enable / disable the booster)...

Hi, yeah unfortunately it seems to be quite hard to do. There's [a weird VirtualBox trick](https://christopherjmcclellan.wordpress.com/2019/04/21/using-usb-with-docker-for-mac/) but I never tried it. This is the first link a found and can't...

> If I configure I2C and EE_HANDS (other than that I am using the default configuration) in the latest QMK firmware and connect the half without the pull-up resistors to...

Hi, this comes as news for me. I’m not aware of a new version of the Redox keyboard. Would you mind sharing some pictures of the board? I’m particularly interested...

Thank you very much for posting this pictures. I didn't know Falbatech added hot swap support! I'll try and add a note about the LED lines in the docs ASAP.

> I supose this is done so the hotswap sockets fit there, so yeah ,shouldnt make any difference. That's probably also why they've moved the diodes outside. I agree. >...

Hi there, everything you reported is indeed correct and already brought to my attention [here](https://github.com/mattdibi/redox-w-firmware/issues/1) and other multiple occasions. > I think the address and channel should be determined according...