Mathias Rasmussen

Hi, I have now enabled it.

Hi, I cannot reproduce this, did you use webpack or?

Try connecting and wait some time before pressing read setup. Maybe also try another USB cable and turn off transmitter etc. You can also try esc-configurator.com

Which version did you use to flash it? With the latest bluejay configurator or esc configurator it should not be possible to brick. Can you post debug logs?

Okay great you were able to get them back! You should be able to use the bluejay configurator, but I recommend using esc-configurator instead because it is more up to...

No it should be the same as when using JESC. You might have to try `set dshot_bitbang=on` in betaflight cli, but it should not have to change if it works...

Hmm maybe it could be a problem with the version of betaflight?

Hi, you could take a look at https://github.com/mathiasvr/matroska-subtitles, which is the module used by this project. You should be able to use it in a web app, by transpiling it...

Hi there, are you running dshot 300 or 600? And which version of bluejay?

@githubtd01 What version of betaflight are you using? Try updating if not latest. You can also try disabling dshot bitbang mode. Does this happen with both normal and bidirectional dshot?