Martin Jäger

Nice, thanks a lot. Shouldn't we add the scripts to this repo? Or is the `easyw/kicad-3d-models-in-freecad` one also a well-known repo where scripts for 3D models are stored? I'm not...

Thanks for posting this issue. I could not reproduce the behavior with [latest main](https://github.com/LibreSolar/bms-firmware/tree/55c2ea2cf5a2658ad180f9c9eff17e8308848b03) firmware on a BMS C1 v0.3.3 board with 4s cells. Once the BMS goes into undervoltage...

Did you also try with the most recent firmware? Also: If it appears only on one board, it may actually be a hardware issue.

If an issue is unrelated to the topic of this issue, please open a new one. Live data publication on the USB serial is now disabled by default. As mentioned...

Very good point, thanks. I'll fix definitely fix that.

Swapped the pins and increased the GND plane gap on top layer from 0.3 mm to 0.5 mm:   You suggested 0.7 mm, which would make quite a few...

The influence of the impedance makes sense. I've swapped the pins as suggested and increased the gaps to 0.5 mm for now. Leaving this open so that future revisions can...

I agree that this would be a nice feature.

Hi Georg, thanks for the quick answer. So I will use the other repo for issues from now on but continue here with this one. Being more familiar with C,...