GrblHeightProbe2

GrblHeightProbe2 copied to clipboard

Use OpenCNCPilot instead

martin2250

applying height map to Gcode

1

I have read all the comments and I have used the GrblHeightProbe2. The software runs perfectly on my Windows 10 OS. The software controls the probe accurately, reports the height...

dgeorge4665

Does not want to Apply Height.

3

Hi, Thank you for your software, I'm having trouble applying the height map, I probe an area of X 96.6 mm Y 69.0 mm, the PCB is X 95.45mm \*...

Jacoleroux

Short Questions Thread

5

Since some people didn't want to create their own issues for short questions I've created this permanent issue. You can also use it for discussions on the topic.

martin2250

Does not work on Windows 7 x64

9

First of all I want to say a huge thank you for such a needed project. milling the PCB on the CNC for me at this stage in the end...

maximius

Suggestions

1

Hello, I tried your amazing software for the first time today after watching the 2 videos on Youtube. If you permit, I would like to make recommendations to improve ease...

intensite

Is the program compatible with GRBL 1.0C?

1

I'm having problems using this program with my X-Controller by Inventables it uses GRBL 1.0C. when i run the probing command it stops during the first point. It show a...

Zwcky101

No connection

2

When you choose "Connection"->"Open"->"Comx" and there is nothing connected to your computer on that COM port x, the program will crash. Maybe it is better to give a Warning Message?...

JacobDekker

Surprised by level traces

10

1st of all, you have created a 1st class (by any criteria) piece of software. You need to have a link to a donate button somewhere (I'd certainly kick in)!...

MikeGarber

Version Confusion

6

I have downloaded and built V2. But I am unable to apply the map to a file. Unlike the video, our GCode menu item only shows "open". When the GCode...

crezyoz