Mike

icon indicating a website link mikeroselli.net icon indicating an email [email protected]

icon location Cary, NC, USA icon location Civil Engineer, Drummer, DIYer

Results 4 comments of Mike

3V3 Logic on ESP device

Apologies, I am neither a professional programmer or electronics designer. However, I see that power coming into the MIDI-IN optional zone is now 3.3V but the power coming into the...

3V3 Logic on ESP device

Ugh. Actually, I'm not sure you can do this, as Midi is a 5v protocol, so on output other devices are expecting 5v. Does that sound right? I don't even...

3V3 Logic on ESP device

All, I included the above information in [my test board](https://github.com/alf45tar/PedalinoMini/issues/22), which I have sent to production and am waiting to receive. Test board proposes MIDI Out via: - 5V from...

3V3 Logic on ESP device

> Correction of the proposal in order to take into account of the MIDI out inverted connector pin 4/5 detected in #30 . > > https://easyeda.com/christian.foucher/pedalinomini-3v3-with-6n138-and-bss138-midi-out-pin4-5-now-ok > You sure the...