Mark Walker

@thebeline Not really working on it, to be honest. Not clear how many people out there are interested in eeprom maps other than current Sailfish other than @michaelbaisch. What is...

The CTC Dual _should_ work theoretically work with the map that we have. I think they did build their own firmware, but I don't think they changed the eeprom layout....

Also, the steps/mm is primarily used by GPX itself to translate from gcode to x3g, so when that when you send a gcode command through OctoPrint, it gets translated using...

Are you printing x3g from the SD card? Or gcode from the pi? BTW: The place you want to change the steps/mm is in the "Edit Machine Definition..." If that's...

* Yes, I think you've found a new issue. The machine definition steps/mm appear to not be persisting properly. I'm guessing a regression due to a dependency. * No *...

Hmmm... This indicates that GPX sent the "cancel" to the printer, which is actually a reset. GPX wasn't able to reconnect with the printer after the reset and so sent...

True. The plugin doesn't have a feature for uploading an .ini file. Changing the title to reflect a feature request.

BTW, I believe the CTC is a clone of a Replicator 1 Dual, so you can also just choose that from the drop down.

The original GPX translator doesn't have any code for M42. It does however attempt to translate M300 into an x3g frame of (8-bits)147, (16-bits)frequency, (16-bits)milliseconds, (8-bits)0. I haven't ever tried...

M300 by itself is the same as M300 S300 P1000 since the default frequency and milliseconds are 300 and 1000 respectively. GPX does translate it and send it to the...