marcone

In case it helps, I have a stack of patches [here](https://github.com/radxa/kernel/compare/linux-5.10.y...marcone:radxakernel:linux-5.10.y) that makes the 4C+ work with 5.x kernels (tested 5.10, 5.15 and 5.19). It'll give you working ethernet, wifi,...

> * USB3 OTG port defauting to host mode Note that this is different from the images that Radxa provides, which may break people upgrading to Armbian, especially since you're...

> Have you tried this build out, yourself? I haven't, but I'm happy to try it once I have time to figure out how to do Armbian builds.

Did you initially not specify a music size and then add one later and rerun setup?

Per discussion in the Discord, this happened because no music size was specified initially, and when rerunning setup teslausb doesn't update the image(s). I will either put a note to...

@chrisalmy 64 GB is the bare minimum that will work. I highly recommend using a 128 or 256 GB sd card instead. I suspect the problem in your case is...

> I am getting same log entry: Music archive not configured or unreachable Music *syncing* is only supported for CIFS, not for rsync and rclone. You can still have a...

Are you using the top USB3 port? (that's the OTG port by default, the bottom one is host and won't work for this) Where did you get the Armbian image?

The minimal bullseye image from that link, specifically [this one](https://github.com/radxa-build/rock-4c-plus/releases/download/20221216-1256/Armbian_23.02.0-trunk_Rockpi-4cplus_bullseye_current_5.15.83_minimal.img.xz), works for me. Since that page recommends using the official Armbian image instead I tried [that one](https://mirror-us-phx1.armbian.airframes.io/dl/rockpi-4cplus/archive/Armbian_22.11.1_Rockpi-4cplus_bullseye_current_5.15.80_minimal.img.xz) too, and it...

> Yes, I was able to get it to work briefly today with the latest Jammy minimal build although I’m sure the bullseye one would work too. Can you elaborate?...