marcinkowalczyk

Some more info https://raw.githubusercontent.com/Nixsm/arduino-ac-remote/master/arduino_ac_zh_jt_03_protocol/komeco.h

Hi, Sure. Still running this AC

Hi, Seems to work on both ZH/JT01 and ZH/LT01. Do you plan to add IR receiver support too?

Hi, I'm currenty testing with another unit with ZH/LT-01 (no access to JT01 at the moment) ``` remote_receiver: id: rcvr pin: number: GPIO5 inverted: True mode: INPUT_PULLUP dump: all #...

cooling 25, swing + airflow ``` [18:25:44][D][remote.raw:028]: Received Raw: 6136, -7391, 638, -1553, 610, -1579, 614, -1575, 614, -1579, 633, -1558, 612, -1578, 633, -1559, 614, -1576, 610, -536, 612,...

Hi, Works fine with 55% tolerance. I will test later-on with other remotes I have

Hi @weetmuts I've recently got an iu880b - I've tried to put it into t1/c1 but no luck. ``` (iu880b) rsp got firmware (iu880b) firmware: 3.0.197 27.01.2022ProLink_LoRaWAN;LMIC_V1.5;EU868;Modem (iu880b) got device...

I'm testing 0.10.2 with latest docker image and seems it's affected by this problem too. rabbit & gateway on one box. Looks that best option is to add another container...

max messages per second connector can handle (or you want to handle) - ie you have peer that can accept 10 submit_sm per second, for various reasons you want to...

It might be your upstream carrier allows only 1mps. It's good idea to stop and start connector maualy after change.