marcelbesoeu

My phone on first connection doesn't return "Unable to find MoonBoard", but BT symbol on the app is not activated and holds are not send. I just register some activity...

I cleared all network settings and my phone few times was able to connect and send problems, but now is not conneting anymore, second phone is connecting all the time,...

Problem with bluetooth is more complex. I have two RPI with the same MoonBoard software: RPI 3B+ and Rapi W Zero and two Android phones Samsung S9 and S10e S9...

All packets are trasmitted from phone to RPI Bluetooth what we can see on BTMON, but only first packet is received on DBUS. Maybe there is another way to monitor...

Maybe the BT problem is old "ble/gatt_base" code? I found project: https://punchthrough.com/creating-a-ble-peripheral-with-bluez/ . Final code looks much simplier.

I found this: https://www.tme.eu/pl/details/hc-f5v-f12-ws2811/zrodla-swiatla-moduly-led/worldsemi/hc-f5v-f12-ws2811-rectangle/ Led spacing is 10cm but 600pcs 15cm wires, 1200 points to solder and 1200pcs Heat shrink sleeves makes 25cm spacing. If someone interested I can prepare...

8cH9azbsFifZ, will your hacked version work on raspberry pi 3B+ or I have to move to Rapi W Zero?

I use 3B+, fresh install "Raspberry Pi OS with desktop and recommended software" and tried e-sr, 8cH9azbsFifZ with requirements loaded and without - loaded only minimal packages neded to run...

Yes - I tried install.sh. The same: app Is coneccting one time, but holds list is not sent and disconnect. I will make clean install and try connect from diferent...

Android on S10e.