ManniX-ITA

I use PPT 135 and TDC 90 for my 3800X at EDC 1A. You can use ZenControl with these values leaving EDC 1A not Auto. ZenControl will lower the PPT/TDC...

It depends on your system; CPU, board, bios version, etc It's not needed, only set an offset if it helps increasing the clocks or performances

It looks good. Even if very small the offset can have a very big impact. Run some game benchmarks; for gaming it's probably better to keep the PowerTweak at AutoPower...

Depends on the game; best is Shadow of the Tomb Raider to test CPU performances.

The FMax Enhancer was a nice idea but most of the times doesn't work and makes the system unstable or slower due to massive clock stretching. You need to be...

The 3800X has only 100 MHz more boost clock but it's much better binned than the 3700X so it's much easier to get a better one. I'd check and experiment...

You may find something interesting reading this article: https://www.hisevilness.com/articles/technology/ryzen-7-overclocking-the-3700x.html?showall=1 Consider testing with Global C-State control to disabled as often is causing issues with the EDC bug. Don't disable Core Performance...

Just adjusting PBO limits it's probably not going to help. You need to experiment and benchmark with different BIOS settings. Higher limits and power draw doesn't mean necessarily better performances....

Try with C-state and CnQ enabled if you didn't already. The LLC seems too high; try with CPU set to Auto or 3. SOC it's probably fine at 4, try...

Very odd, it's almost identical to 1.1.7 except a few small fixes. Are you sure you didn't change anything else? Did you upgrade from a previous version? If that's the...