Mariusz Białończyk

Much thanks for this... I was trying to compile on riscv64 with musl and encountered statx missing in libc as well. First I was doing this kind of workarounds: ```diff...

Hi, it doesn't hold together: you have the needed device: > user@device:~/skymax-demo$ ls /dev/hid* /dev/hidraw0 in config you have a proper value: > device=/dev/hidraw0 But when starting you've got: >...

All seems fine, you have the needed device (/dev/hidraw0) but it seems, that `inverter_poller` cannot open it (or it is trying to open quite different file)?! weird! Read my blog:...

If you have reboots than I think it may be some kind of power issue. The logs can be easily extracted but only when the Pi is not rebooting. I...

Hmm.... this still seems for me like a power/hardware problem... maybe as the last resort try to connect some small HDMI display to the HDMI port to visually see what...

Please tell me one thing, @sharmay. I read this issue again and you tell us: > I tried setting up another phone Samsung S22 Ultra which failed and during next...

> I connected HDMI monitor, setup phone to record video, connect PI to Jeep and start engine. PI starts booting and get to the status shown in 1st image and...

OK... your logs is not telling us anything new. It is only confirming that you have a hardware issue. It is not normal that raspberry is restarting. And there may...

Hmmm... it makes sense, and in this case probably you don't need this cable :) The cable was mentioned in regards connecting Pi5 where it is unable to grab power...

> I have also tried switching the connection mode to 2 which prevents the reboot doom loop but the phone never finds an android auto connection. Maybe you can try...