man-go1

great, I think i have the same bike as Stefan (in the other issue). its a VFR. m'n is from 2010. i looked around on internet and found a table...

i think so. what i did( see below) and i get a succes back. //initialise communications byte initHonda(){ debug.println("Starting initialise Honda"); bike.end(); delay(350); //Sending LOW digitalWrite(TX_PIN, LOW); delay(70); //Sending High...

This part is okay. But I can’t get info out of tables.

hi, sorry for the late response but i fryde my Arduino.. and needed to fix it. i think i know how to communication works. i can get table 16 from...

hi, as i have learned. is this step an initialise: -/--------------------------------------- send a low wait 70 ms Send a high wait 120ms send: 0xFE, 0x04, 0x72, 0x8C receive: Nothing wait...

If you have some other code to look at response I’m happy to try. But I can’t get a response back. About the other question. I’m still cracking my brain...

Tnx, Will check tomorrow. 👍🏻