Mamert

Same. No matter the device class I set, it doen't work (on the "host") as input (e.g. Windows says "connected music" next to a kb or mouse icon) hidclient itself...

Well, the initial SSID is NOT "ESP_whatever", the initial SSID is "what was last used before you flashed esp-link". Flashing esp-link doesn't change existing wifi settings, sadly. So, as part...

It seems the scripts take the FIRST available app config for the specified backend. In my case, it defaulted to CANalyzer (while I was using CANoe), and CANalyzer's logical interfaces...

For me, letter case does not seem to matter. I get the same error as @Azkom even when I run ./discover FC:D6:BD:10:19:2A (yes, same MAC as he used). ./ble_scan lists...

@oliviermartin I'm afraid I can only add to the confusion, and I apologize if I had missed something obvious... before pulling your changes today, I reset everything to defaults and...

You could, however, connect 2 modules together, one as a dedicated flasher. It's been done as an arduino programmer. Not easy, though.

BUMP. Are you going to repackage 1.5.5 or not?

I can add a photo of two more boards that use this pinout:  Thing is, while they can be unlocked (throwing an error, but it works after) and erased,...

Both behave identically (fail). Though I have not had a single success with the sideboards, I have built hoverboard-firmware-hack-FOC successfully in the same VSCode, so the environment is OK

What's the progress? I'm having many-minute delays playing h.264 stream from another pi: raspivid -t 0 -n -b 450000 -w 480 -h 360 -fps 22 -l -o tcp://0.0.0.0:1100 playback: omxplayer...