malinhiles
malinhiles
> Some of the devices you have to be very close to get it to work, especially when the device is connecting to your home network, some of them need...
> The thing with 3.0 is that all the firmware for ESP based RXes is the same! i.e. the binary is the same and the only difference is a hardware...
Any thoughts on this? I've got Matek on the other line and they don't think this is an issue with their receivers. I've got three of these Matek PWM receivers...
> If you are able to flash via FTDI, then perhaps try a full erase flash before flashing the latest firmware. We have seen issues before, and a full flash...
@pkendall64 just tried the force flash, no luck. The flash still fails. Additionally, any ideas as to why the configurator cant auto select the wifi device? (in reference to the...
> It is expected that "no device found" will be seen. > > The web-flasher won't be able to connect to devices over wifi unless you have the proxy running...
@pkendall64 here's a screenshot and a log dump from a force flash attempt👍  [ExpressLRSBuildLog_20220908204650551.txt](https://github.com/ExpressLRS/ExpressLRS/files/9530497/ExpressLRSBuildLog_20220908204650551.txt)
> What if you connect to the RX wifi with a browser and try updating that way rather than using configurator. By this do you mean a flash via the...
> Yes, or if you have your wifi credentials you can also connect to the IP address that Configurator is telling you. 192.168.86.25 Next to the "SELECT" button. Ahh i...
> What is buggy with 2.6.0 and 2.7.0? I use them without any issue. If you know about any bug/issue - please open a ticket here! Here's a couple others...