MKS-StepStick-Driver

MKS-StepStick-Driver copied to clipboard

Pin ordering on JP2 in MKS TMC2209 V2.0_001 SCH.pdf is GND, VIO, OB2, OB1, OA1, OA2 pin ordering on JP2 on PCB MKS TMC2209 V2.0_001 TOP is GND, VDD, 1B,...

Richsl

UART mode on Arduino

1

Hello, I'm using an Arduino Mega Pro 2560 and a TMC2209 V2.0 from Makerbase. This one : https://aliexpress.com/i/33043140087.html I uploaded the sketch below and my Serial monitor outputs this error...

musapinar

I'm very new in electronic and I wold like to change ma step driver (A4988) with the supersilent TMC2209. But I have a problem. I'using an MKS TMC2209 v2.0 (UART)...

nexius76

(I believe that I've checked every reasonable resource where this might have already been documented, I'm sorry if this is a well known discrepancy and that I simply missed it...

njroussel

Weird UART problem with ESP32

1

Hi! I have a MKS TMC2209 v2.0 silentstepstick driver connected to a custom PCB that I made. I am using the [TMC2209 arduino](https://github.com/janelia-arduino/TMC2209) library to communicate with my driver, this...

Angelo13C

Question regarding UART communication with ESP32 dev board

1

I can't get UART communication working with ESP32 (https://wiki.banana-pi.org/BPI-Leaf-S3 clone of ESP32-S3-DevKitC-1) with MKS TMC2209 v2. Here is my wiring diagram:  I'm using following Adruino code (https://github.com/janelia-arduino/TMC2209/blob/main/examples/TestConnection/TestConnection.ino) to test...

tomasAl

Is UART mode enabled by default?

1

It is not clear if we need to do something to enable UART communication. The specification says: "Supports UART mode by configuring jumpers." Im talking not about 3d printers bus...

tomasAl

Hello, the values of the resistors and capacitors are missing. `https://github.com/makerbase-mks/MKS-StepStick-Driver/blob/master/MKS TMC2240/MKS TMC2240 20V1.0_001/MKS TMC2240 V1.0_001 SCH-2.pdf` Don't know how to attach the correct link. Please fix that. Kindest regards,...

hcet14