MKS-Robin-Nano-V3.X

MKS-Robin-Nano-V3.X copied to clipboard

Robin nano v3 serial communication error.

1

1019 / 5000 Resultados de tradução Good Morning! I bought a Robin nanoV3 and made the marlin 2.0 compilation from the mks github repository. I configured everything that was necessary...

wvdias-git

M503 command have only OK response through Wifi connection

4

I wanted to change the eeprom settings in Repetier-Host through Wifi connection, but it is not possible, the window is empty. The M503 command has only OK respose.  M115...

pagabee

Probe bed leveling not work if activate dual homing by 2 drivers and 2 Zmax endstops

2

When I activate dual drivers for Z-axis and dual Zmax endstops probe bed leveling dont work, bed goes down to max endstops for homing, then go up to nozzle and...

martinways

Bed / Nozzle Temps Reading Random Values

9

Problem: I have fully wired in the Robin Nano V3 and I am getting temp readings that bounce between -8000 and 8000. The values appear to be random and change...

CollinCBoring

Despues de instalar BLTOUCH dejo de funcionar el lector SD y USB

1

Tengo un problema, actualice mi placa para que funcionara el bltouch, todo iba bien hasta que me di cuenta que no me lee la USB y la tarjeta SD, intente...

gusalgora

assets folder don't update

6

I downloaded the latest Marlin for MKS-Robin-Nano V2 / V3 and made all the changes to update the Robin Nano V3 card. PlatformIO also compiled and generated "active" folder and...

acguardia

Updating Firmware Freeze at 100 %

2

Hi, I am trying to update the board using an USB drive (4GB, FAT32), after detecting the flash drive, its erasing , and uploading the firmware. Unfortunately the screen freezes...

fh2301

Printer stops while printing

4

I have problem with random stopping when printing, I use TM2208 (standaolne) stepper drivers with fan cooling and Mks-Robin-Nano-Marlin2.0-Firmware. It stops in a different layer and different spot. Where could...

seymon92

Using USB drive and SD at same time?

5

Good morning, it is possible to use both at same time, USB drive and SD micro card? I have tryed but din't success, not sure if I made a mistake,...

themacboy

I tried ESP3D on my new MKS WIFI module, but after some erros, I want to come back to original firmware. I downloaded latest firmware, unzip and copy to the...

ColdBeer72