MKS-RUMBA32
MKS-RUMBA32 copied to clipboard
makerbase-mks
MKS RUMBA32 is modified in Aus3D RUMBA32 version and a powerful 32-bit 3D printer control board with STM32F446VET6 , The main frequency is 180MHZ. Support Marlin2.0 , support MKS LCD12864B/MINI12864/2...
mac: FS mode dfu mode Win 10 VCP_V1.5.0_Setup_W8_x64_64bits.exe installed, it recognized the board worked once to get firmware onto board but I can no longer update the firmware. FS mode:...
If i configure it (As far as i can see, correctly, but hey) and compile it, it still gives me errors like Marlin\src\HAL\STM32\tft\tft_spi.h: In static member function 'static void TFT_SPI::DataTransferEnd()':...
Successfully flashed marlin with platformio. My configuration work with fullgraphics lcd. TFT70 also works with this board. But I cannot connected to board with USB. Pronterface and cura can't find...
Hi. I've recently bought one MKS-MINI12864-V3 LCD and still can't find where are pins for it in MKS Rumba32. So far I figured out that the following code will make...
Hello, I'm having trouble using the board with my TMC2130's. M122 gives the following: Recv: X 0x00:00:00:00 Bad response! Recv: Y 0x00:00:00:00 Bad response! Recv: Z 0x00:00:00:00 Bad response! Recv:...
Hi, we are using MKS-RUMBA32 board. We have uploaded the latest Marlin to the board. We are using MKS TFT3.5". Here also we have updated to the latest firmware. In...
I have 6 TMC2209 in my Rumba32 board. I defined PB8 for Servo pin in pins file but It didn't work. Can you help me about that. I tried PB9...
this problem just started. I have a large format printer that I switched over to a .60 nozzle to print some 420x420x100 prints @ 230°, prior to that I had...
Recently I decided to upgrade my printer mainboard from BIQU Rumba to MKS Rumba32. And now I can't manage the LCD to work. The same Marlin with just mainboard changed...
Hello there, i just purchased one of your MKS Rumba32 boards and i have problems to communicate with this board via USB. I am using the firmware Klipper, which uses...
Metadata
Owner
Metadata
MKS RUMBA32 is modified in Aus3D RUMBA32 version and a powerful 32-bit 3D printer control board with STM32F446VET6 , The main frequency is 180MHZ. Support Marlin2.0 , support MKS LCD12864B/MINI12864/2...