CANable-MKS

CANable-MKS copied to clipboard

From various reading on the internet there are a few unclear areas: - Does it support BUSMASTER application (https://rbei-etas.github.io/busmaster/) If so which firmware should be used, and where can it...

techlobo

Sources

3

Some questions: 1)where can I find the sources? Here I see only the zip compiled files 2)is it possible to use canable to make the cheapest immobilizer for cars, by...

gaucho1978

Hello, how to fix that bug? 

ghost

Failure to receive and send information in canablev2

3

I made the schematic of version 2 canable with stm32g431CBT6 chip according to the schematic. There is a hardware problem in the schematic, that is about the boot base function...

mahdimohri

canable2 gs_usb SetCAN baudRate

2

hello, I had some problems using MKS CANable V2.0。 1.about"BUSMASTER_Installer_Ver_3.2.2-cantact", I set baudRate 500k test normal，but set 100k Software crash。The supported baud rate types are not complete, Is there any...

monkeyish-smart

buggy CAN transceiver init behavior

1

Hi there, I have a MKS-CANable v2.0 PRO which i think has slightly buggy behavior on init/reset. I'm using the candleLight firmware blob from this repo (https://github.com/makerbase-mks/CANable-MKS/tree/main/Firmware/CANable%20V2.0), but i think...

SebKuzminsky

Hi there, the README says: ``` Provide schematic diagrams, firmware and source code ``` But i only see firmware binaries... Where can I get the candleLight source code for the...

SebKuzminsky

Hello, I would like to know where can I find the hardware documentation for the CANable V2.0 Pro version. Thank you

xultz