maik-dmxc

DMX sending stops after call DMXSerial.init(DMXController,Direction); twice

1

hi, i've made a LED TUBE sketch, and found that if i call `DMXSerial.init(DMXController,Direction);` twice wenn mode is already in this mode `DMXController` the Output stops! after calling `DMXSerial.init(DMXController,Direction);` again...

Hi, i switched from oled to ILI9341 (LCD 194) now the battery percentage is missing! can you please build the battery display on the main screen ;) this indicator should...

Arduino Nano reboots startup

1

dear karawin, i have build the addon with an Arduino Nano, connected tx/rx via levelshifter 3V->5V. the communication works perfect, but if the Nano send "cli.info" on startup, the Nano...

Error mqtt

2

Hi i get an message when starting MTEC_mqtt.py ``` pi@raspberrypi:~/M-TEC-API $ sudo python3 MTEC_mqtt.py Traceback (most recent call last): File "MTEC_mqtt.py", line 148, in main() File "MTEC_mqtt.py", line 118, in...

### Description on older PI4 with Bullseye i was running 2 ebusd#.service that grabs the related config from /etc/default/ebusd two Adapters where defined ``` EBUSD_OPTS1="--configpath=/etc/ebusd/ --lograwdata=bytes --latency=100000 --receivetimeout=100000 --scanconfig -d...