magnum3131

Hi, Thanks a lot for your answer ESP32 1 => Slot 1 rpm sensor ESP32 2 => Slot 3 rpm sensor ESP32 3 => Slot 5 rpm sensor I made...

I did more test The configuration is the following Powerbox Spark Switch pro => slot 1 to 5 Powerbox Mercury => slot 8 to 23 ESP32-1 RPM => slot 6...

Hi, I'll test the new case this evening I don't know if it could affect the SBUS2 Library but i have a 2.4 resistor between the TX/RX Pin Thanks Julien

This is strange, the test with powerbox and esp32 has been done with a 7003sb on my plane I'll try with a 7008 Julien

Hi, I do your test ESP32-1 with 2,3,4,5 RPM Sensors on SLOT 1 to 6 ESP32-2 with just one RPM Sensor on SLOT 7 It's working with the 7008sb but...

Hi, Thanks a lot for your expertise, for resuming i have to change my 2.4k resistor for a 1k and i have to add a diode. I need to place...

Hi, I order all the stuff, i hope i'll receive next week. I had to find a solution because in my club we try to do ESP32 hardware which can...

Yes ex bus I use this library https://github.com/Sepp62/JetiExBus Julien

Hi,Not yet, i'am in HallydayI'll let you KnowlesThanksJulien

Hi Éric,Of course i can, What kind of informations do you need ? Thanks JulienLe 23 juil. 2021 14:56, ericlangel ***@***.***> a écrit : @magnum3131 could you try the new...