Mike Marvin

@BtrieveBill make sure you're on version 0.7.0 if you're on Home Assistant 2021.9.x. That version uses the `total_increasing` state class and should fix that problem.

You should just have to wait and it should start calculating correctly with future data, assuming that's all the issue was. The total will definitely be out of whack because...

Often doing a reload of the integration or a restart of the server can fix that, it's usually due to some of the requests for the device list not succeeding...

Is there anything different about the sensors that are missing than the others? Is there anything mentioned for this integration in the home assistant logs?

I've seen a bunch of errors from their API and if they happen during startup then the integration will fail to load correctly. Reloading the integration *should* fix that since...

Try reinstalling the "master" version through HACS, it's got some changes that were made for 2021.9 but don't work with 2021.8 and might fix this problem.

I'm going to try to get an update out today that's got the current master changes and flip the solar production to positive, which should at least clear those errors.

> Isn't Mains to Grid sensor is the solar production value If you have a clamp on the wire coming from your inverter to your breaker box you can measure...

I believe this is an issue when trying to parse the time that a device went offline. If you have any devices that you haven't had connected in a while...

v0.6.6 should hopefully fix this issue, please let me know if it does/doesn't!