Maeen Kamal

Hello Again, I decided to switch from using the NodeMCU to an Arduino Uno. I have been having a hard time with the hardware parts of things. I have finally...

So I went ahead and tried both the basic sender and receiver tests. These are the outputs I am getting on the Serial Monitor. Basic Receiver  Basic Sender ...

You are maybe right. I will double check that.  I was wondering if you utilized an external power supply because I am simply using the connection from a usb...

By any chance, were these the connections? These are the physical connections I made. Just want to make sure. Thank you again for your help! 

Hello again, it seemed as if I posted in the wrong post last time. Below includes the conversation from the recent post.  I wanted to make sure just how...

I have made sure that the both serial monitors were printing out the device mode when not using the voltage divider method when testing the two way initiator and responder....

> In my tests the dwm1000 isn't too picky about power, just add a 100uF capacitor and you should be fine. Thank you for the response. I too believe that...

Hi guys and thanks for the reply, I am editing this post entirely. I realized that the library beginning of SPI actually sets up the SPI modes. The basic senders...

By any chance, was there any flashing needed on the decawave chip or the dw1000 chip themselves? If so, do you guys know how to do that or provide me...