A&H Automation LLC
A&H Automation LLC
> ok, I was under the impression something is wrong on my end. It off by 20 to 30 degree.
> BTW. You have some unusually high config values that are being constrained. I am using linear movement as angular plus micro stepping. It's accurate but slow so I cranked...
Yes thank you
This problem started after version v3.4.4. In this version the problem is not there. FYI
I should have read the "Issues" I spent two days thinking it's my board. I must have soldered on so many filtering caps. I am a dummy lol.
I noticed that. I am aslo trying to solving this without a scope. Thank you for the prompt reply
Do you have a way to test it? I can help my board seems to be prone to this problem. 
Hi Mitch, this seems to fix it. I will do more testing and let you know.
> https://linuxcnc.org/docs/html/gcode/m-code.html#mcode:m66 > > I can add that to our dev issues tracker for future consideration. It does not sound too complicated, but we are working on more basic things...
No longer issue. I set $5 to 31