Momchil Binev

@astraw Hi Andrew, many thanks for your work and contributions & we could very well understand your demand and feel your "pain", but we unfortunately cannot offer you a solution...

@sulaimansiddiqi233 Hi, to use the pylon vTools you have to use the pylon C++ Data Processing API now. There will be a Python API for using the vTools in future,...

@sulaimansiddiqi233 Hi, well, you have to either order a free evaluation license to be able to run vTools in API (with limitted execution time and for limitted period), or buy...

@sulaimansiddiqi233 Hi, you cannot run the vTools/recipes in the API with a demo license. The demo license is only for testing the pylon Viewer/Workbench. Please refer to my previous posting....

@sulaimansiddiqi233 ok, I'm glad I could help. As said, you can request a free evaluation license for 180 days. Cheers.

@albeit07 @amarnathreddy0201 Hi, the topic synchronisation of miltiple cameras is not so trivial, because 1) the different camera interfaces & protocols (GigE, USB) are different (and behave different), and 2)...

@nickzherdev Hi, may you describe your setup, please? That is, what camera models? any Switch? etc. I suppose, you experience IP packet collisions, packet losses and image losses and would...

@nickzherdev Hi Nick, beg a pardon for the delay. To be honest, as your setup is a little advanced and the exact configuration and root cause are still unclear (to...

Hi @JaleesaHoule, assuming the camera is runnung at 100+ Hz with the same settings in pylon (Viewer), then you should check the Acquisition Mode settings. That is, if the camera...

Hi @JaleesaHoule, when loading the ros driver, some/many camera settings get overwritten. Thus, you have to do the "right" configuration for your use case in ROS. I think, just setting...