Leon van O.

Looking for this as well! Is the assumption incorrect that when the app reports about the Zappi error, that the info must be available within the api (somewhere) as well?

Just checked the output in HA, because the app showed the "Pect selftest failed". "data": { "XXXXXXXXX": { "deviceClass": "ZAPPI", "sno": XXXXXXXX, "dat": "11-07-2024", "tim": "12:00:22", "ectp1": 0, "ectp2": 0,...

Earthing has been checked twice, no issues found. When this happens, the solar output is around 1500 kwh and MGL set to 100%. My car can start charging at a...

The Zappi was installed in 2020 on 3 phases. There was already a PV system (installed 2016) on 3 phases. Recently (2024) a small PV system was added which is...

Should I check the Zappi PF values when it is charging the car or when it's idle? The single phase PV system was added a month ago, I've been having...

So I just checked the Zappi readings (not sure if I have the right values): CT1: 4.1A | 1034W | -1.00 CT2: 5.0A | 1325W | -1.00 CT3: 13.1A |...

I’ve checked the CT values when PV production stopped. CT1: 1.1A | 22W | 0.08 CT2: 1.0A | 195W | 0.84 CT3: 0.5A | 61W | 0.46 I made a...

Thanks everyone for creating the integration of EneryZero into EV Smart Charing. Was looking for this for a while and just found out through the EV Smart Charging release notes....

Thanks it's working (I had to re-add the EV Smart Charging integration to HA). Very happy with this update!!