luoxz

upload releases tag v1.0-alpha2 vive-diy-position-sensor.hex , how to output the position to the screen？

[vive_sensor_breadboard.pdf](https://github.com/ashtuchkin/vive-diy-position-sensor/files/8086101/vive_sensor_breadboard.pdf) #68 Is this breadboard schematic correct?

The arduino is also connected through the usb serial port. Can you interact with the command to get the location debugging information and output it to the screen?

https://www.pjrc.com/teensy/tutorial3.html arduino usb Serial?

https://www.pjrc.com/teensy/usb_serial.html [serial_install.exe](https://www.pjrc.com/teensy/serial_install.exe) USB: Virtual Serial Port？ https://www.pjrc.com/teensy/td_serial.html Using teensydino USB Serial Communication?

https://github.com/Koromix/tytools/releases #53 Use [tytools](https://github.com/Koromix/tytools) (if i remember correctly the command should be 'tycmd monitor') with this you acces the teensy, to exit debug mode (in case you start in it)...

  Is there a schematic diagram of a simple panel?

https://github.com/TriadSemi/TS4231 https://github.com/HiveTracker/firmware https://www.arduino.cc/reference/en/libraries/ts4231-library/

TS4231 support HTC Vive 2.0

TS3633-CM1 cannot be purchased anymore