Duke comments

Results 7 comments of


                                            Duke

I have made the PCB on JLCPCB. If this works, I will inform you at once.

I ordered few boards from JLPCB but it does not work. @Yeah2333 Do you have any idea of how to make it work?

I have made the PCB on JLCPCB. If this works, I will inform you at once.

> > I ordered few boards from JLPCB but it does not work. > > @Yeah2333 Do you have any idea of how to make it work? > > I...

I have made the PCB on JLCPCB. If this works, I will inform you at once.

Finally made this work. The reason is the 1.8mm board from JLC is not thick enough for the contact, after simply pasting some sticky tape on the back, it works...

I have made the PCB on JLCPCB. If this works, I will inform you at once.

> Awesome! My boards have shown up, but my miniware hotplate is broken at the moment so I've not been able to solder one together yet 😢 my attempts with...

I have made the PCB on JLCPCB. If this works, I will inform you at once.

> I guess the contact is still not solid enough. And be careful to increase the thickness, it may break the fins in the slot if the PCB is too...

来电挂断插件不会正常工作。

debug看了一下，Android8下抛异常提示没有android.permission.MODIFY_PHONE_STATE权限应该是需要设为系统默认电话应用才能生效 logcat如下： TelecomService: : endCall: calls from pid = 15527: TSI.eC@EzU 08-17 09:45:43.905 15527 15544 W System.err: java.lang.SecurityException: Neither user 10176 nor current process has android.permission.MODIFY_PHONE_STATE. 08-17 09:45:43.905 15527...

自编译固件ext4-combined-efi.img，启动异常

@seasun2k 请问你用的哪个内核版本？我用6.x内核都没办法启动，5.15就可以

Duke

I have made the PCB on JLCPCB. If this works, I will inform you at once.

I have made the PCB on JLCPCB. If this works, I will inform you at once.

I have made the PCB on JLCPCB. If this works, I will inform you at once.

I have made the PCB on JLCPCB. If this works, I will inform you at once.

I have made the PCB on JLCPCB. If this works, I will inform you at once.

来电挂断 插件 不会正常工作。

自编译固件ext4-combined-efi.img，启动异常

来电挂断插件不会正常工作。