Luke Butler

Does anyone have a workaround for this? When doing Control + c, the prompt continues as if you've hit enter. Very dangerous depending on what the action is.

Thanks for the quick response! **Brightness Level** `LedTable 0` takes me back to the main menu, but I did run it 3 times. `DimmerRange 20,100` no change whatsoever `DimmerRange 40,100`...

``` LedTable 0 DimmerRange 20,100 ``` Fixed the brightness issue after all. Thanks for your help on that one. Seems like something that should be default for this device? Just...

> 05:32:38 MQT: stat/tasmota_00E800/RESULT = {"ShdLeadingEdge":0} I went ahead and switched it with `ShdLeadingEdge 1`. Still flickers a slight bit on lower brightness, but I think it isn't noticeable enough...

Apologies on the late response. I am on 60Hz electricity, yes. I've tried a few different LED bulbs, including some Amazon Basics dimmable bulbs. No apparent flicker when using stock...

@jamesturton yes.

Awesome, trying these out this evening (easier to see flickering after dark).

@jamesturton So I flashed between the original 51.5, beta1, and beta2 three times so I could be sure of the differences. **Beta 1** Better than the original. Still flickers a...

Thanks for the report! Do you have general steps needed to reproduce this? I'm going to sit down and tackle this asap. This is definitely something a test should be...

Awesome! I'll add to this issue when progress is made.