Anton Avramov

I have the same problem in debian 10 buster and the latest code. Interesting thig is that it works fine on Ubuntu 20.04 focal. So far I haven't been able...

OK. So I've tried debian 11 Bullseye and there blowfish works as expected. It appears that /usr/include/crypt.h in debian 10 is part of libc6-dev package where in Ubuntu and Debian...

I have this issue to. It is very annoying.

Version: 1.1~pre17-1.2~bpo10+1 Some time has passed but I think the problem also exists with only 1.1 nodes. However I've migrated to another VPN solution and cannot assist with tests anymore....

I've made sure nothing else is running. I've also tried to set the serial port speed to 9600 just in case. After commenting 187 and rebuild I get a message...

root@barsy-test:/usr/src/opengalax# ./opengalax -f -s /dev/ttyS0 opengalax v0.4 Configuration data: serial_device=/dev/ttyS0 uinput_device=/dev/uinput rightclick_enable=0 rightclick_duration=350 rightclick_range=10 direction=0 psmouse=0 Calibration data: xmin=0 xmax=2047 ymin=0 ymax=2047 SENT: F5 READ: 1F panel initialization failed: 0x1F...

Is there anything else I can do to resolve this issue? I really need to get this touch working. I can also provide SSH access to the machine in question.

You can try this: Put this in your big query:`LIMIT IFNULL($page, 25) OFFSET IFNULL($offset, 0);` and then create some navigation buttons ```sql SELECT 'button' as component, TRUE AS center; SELECT...