Lukas
Lukas
I want to make a USB Stick Writeblocker. Is it possible to plug a USB-Stick to ESP32-S2 and emulate a USB device with the content of the actual USB-Stick to...
if for example a black panda is used, the connected can bus is not always can 0. In my setup it is can 1, the variable simplifies the changeover.
### Reproduction link [https://codesandbox.io/s/tkgkyk](https://codesandbox.io/s/tkgkyk) ### Steps to reproduce open many tabs with the add button. ### What is expected? the add button should be sticky on the right edge. ###...
In a conversation with DebboR, we considered removing the Model S code from openpilot and adding a clean Model3 code instead. Here is an implementation with only Tesla Model 3/Y....
The best thing about this carport is that only a single bus had to be intercepted. 🎉 No external Panda is required, just a C3X and a harness box. **Checklist...
Add support for Tesla Model 3/Y Prerequisite of https://github.com/commaai/openpilot/pull/32182
Add support for Tesla Model 3/Y Prerequisite of https://github.com/commaai/openpilot/pull/32331
Added signal for the driverseat buckelstatus, which is the same for RHD and LHD. VCLEFT_switchStatus does not appear on the party bus. this was incorrect and has been removed, it...
**Checklist Model 3** - [x] added entry to CAR in selfdrive/car/tesla/values.py - [x] test route added to [routes.py](https://github.com/commaai/openpilot/blob/master/selfdrive/car/tests/routes.py) - [x] route with openpilot: b5f2b5b4ef23f4b6/00000008--d88c2210a5 - [x] route with stock system:...
Add support for Tesla Model 3/Y Prerequisite of: https://github.com/commaai/opendbc/pull/1263