Lucian CRISTIAN

oh, how many times I wished a telnet client to be available by default ! hope this goes in..

I guess workaround can always be fun, especially when you have to jump, then jump, then again jump and you have to connect to devices that don't have a default...

tried ZyXEL XGS1250-12 with latest and applyed all realtek (clock and interrupts) pending but can't build, fails but using latest Kobi's binaries seems that spf+ fiber (tried several vendors and...

`drivers/net/phy/rtl83xx-phy.c: In function 'rtl9300_sds_patch': drivers/net/phy/rtl83xx-phy.c:3394:9: error: 'for' loop initial declarations are only allowed in C99 or C11 mode 3394 | for (int i = 0; i < entries; ++i) |...

so, tested with 9302B this is repeating on the console every second ``` rtl9300_read_status: Port 27, SerDes is 9 rtl9300_read_status got SDS mode 1f ``` and 2.5gb mode is not...

still the same issue working ``` [23546.576021] rtl83xx-switch switch@1b000000 lan9: Link is Down [23546.583475] switch: port 9(lan9) entered disabled state [23550.966547] rtl930x_switch_irq link faults: 09ffff00 [23550.972078] rtl930x_switch_irq RX symbol errors:...

had another run to see about the sfp+ and I have this when I first connect it ``` [ 98.810000] rtl9300_sds_tx_config SerDes 9, pre-amp enable 1, pre-amp val 2, main-amp...

still no joy for me.. :( I use and usb3 to 2.5gb realtek adapter also the annoying repeating message, ``` [ 33.472841] rtl930x_switch_irq RX symbol errors: 000001c4 [ 33.503330] switch:...

looking at the other patch, it seems that the annoying message is just removed ``` mode = rtl9300_sds_mode_get(sds_num); - pr_info("%s got SDS mode %02x\n", __func__, mode); + if (mode ==...

maybe do I need t write it to flash? I'm using only the initramfs images