Luc Devis

Update: `./heimdall detect --usb-log-level debug --verbose --stdout-errors` cannot detect the device. Plugging in the device doesn't cause any messages to show up in with `sudo dmesg --level debug` In hindsight,...

I just came up with the idea of trying to flash non-critical partitions. If flashing fails, the SPH-P100 should still boot. Once flashing works, I'll try to flash the kernel...

This was unexpected... the binary with the code in #347 seems to have not done anything when I tried to flash the modem (I'll post that log in my next...

This was the output from the command when #347 was applied. (It didn't work. The phone started booting during the flashing.) ``` $ ~/Heimdall/build/bin/heimdall flash --MODEM modem.bin --resume --no-reboot --usb-log-level...

@JonnyTech The first time I tried flashing the recovery partition I did not use `--no-reboot` or `--resume`. My command is in the original post: `heimdall flash --KERNEL ` It softbricked...

One more piece of info for whomever it may concern: Somewhere above I mentioned flashing a modem file, well here is the archive where I got the modem file from:...

I'm unsure whether a device similar to the `LG G Vista VS880` (codename vs880) is supported by [the patch file for the `LG G Vista VS880`](https://raw.githubusercontent.com/ameer1234567890/OnlineNandroid/master/part_layouts/raw/partlayout4nandroid.vs880). Information on the device...