KissSheep
KissSheep
how to export the camera parameters and 3D sparse points like COLMAP?
> if you have the latest code, you are using zero123-xl.ckpt look at line 160 from the main.py also guidance/zero123_utils.py line 73 ok, thanks! But what's the command I should...
> so basicly you use zero123 when you run image to 3D generation. try reading the codes in readme file aboout image to 3D generation. or you can try seomthing...
> 你好！ 我也是遇到关于colmap生成参数有问题的情况 我将提供的测试集的图用colmap+colmap2mvsnet.py跑出来的结果与实际提供的差很多 当然生成的结果也不对 但不知道错在哪 请问大佬解决了吗 mvsnet的相机参数我记得是从ground truth转换过来的，colmap跑出来的精度没有那么高，所以结果要比原来差
对的，dtu有标定好的相机参数Sent from my iPhone------------------ Original ------------------From: hhl134 ***@***.***>Date: Tue,Jun 20,2023 7:48 PMTo: YoYo000/MVSNet ***@***.***>Cc: KissSheep ***@***.***>, Author ***@***.***>Subject: Re: [YoYo000/MVSNet] camera parameters from colmap have some problems(Issue #147) 大佬知道怎么转换吗 ground...
你说的是参数跟他的参数看起来差别大还是说跑出来效果差别大Sent from my iPhone------------------ Original ------------------From: hhl134 ***@***.***>Date: Tue,Jun 20,2023 8:27 PMTo: YoYo000/MVSNet ***@***.***>Cc: KissSheep ***@***.***>, Author ***@***.***>Subject: Re: [YoYo000/MVSNet] camera parameters from colmap have some problems(Issue #147) 现在我是想自己做测试集 他也提供了colmap2mvsnet.py...
Colman跑出来确实有误差 效果比原来差是正常的 相机参数差很多是因为坐标系选择不一样 深度不一样也是尺度不一样导致的 原因还是出在colmap精度不够发自我的iPhone------------------ Original ------------------From: hhl134 ***@***.***>Date: Tue,Jun 20,2023 8:40 PMTo: YoYo000/MVSNet ***@***.***>Cc: KissSheep ***@***.***>, Author ***@***.***>Subject: Re: [YoYo000/MVSNet] camera parameters from colmap have some problems(Issue #147) 两个都是有...
I want to know, too. Did you get any information about these?
How many epochs did DTU dataset need during training? I found the default num_epochs is 10000000, that's crazy.