Andres Rodriguez

> So that's the dkms source built against the 6.16 kernel? Pretty much. The dkms source is the 6.16 driver with some changes to make it work on 6.11. The...

> Have we confirmed what board-2.bin actually does? My understanding is that it is a configuration blob. It contains information about transmit channels for different regions, transmit power values and...

> I'm currently testing 3.8 (build 20251001.1001) with only board-2.bin and after one playthrough so far, didn't encounter the issue. Hopefully it keeps working after a couple more test attempts....

> although it looks like the upgrade to SteamOS 3.8 caused the ath11k driver to revert to the in-tree one based If you want to confirm that you can run:...

@safijari it looks like your pipewire config has been edited somewhere. Based on the system report you submitted, this is what the output of wpctl status looks like on your...

If you are still running into this, can you do the following: 1. Wait for the steamdeck to wake up unexpectedly 2. Go to Settings->System->Create System Report 3. Submit the...

@firrae Thanks for the info. Github doesn't let me move comments, but your issue is probably related to this topic instead: https://github.com/ValveSoftware/SteamOS/issues/2119

@hecksadecimal some data from your system report: ``` Command: cat '/sys/power/pm_wakeup_irq' || true 28 ``` This tells us it was irq 28 that triggered the wakeup. That maps to: ```...

Sorry, I tagged the wrong person above. That data was from @hecksadecimal 's system report.

@christiansam If you upload a system report I can take a look at the same data for your unit. Make sure to upload it right after you see the undesired...