Spike

If I understand correctly the secure video implementation requires a subscription to at least the 200GB iCloud service and then it offers a rolling recording in the cloud of 10...

@brutella Indeed, if the custom characteristic does not support content that is larger than a snapshot then it would be difficult to keep this kind of functionality within the HomeKit...

> Can someone advise on how to get the probe sensor working, its all wired correctly and has the bat85 installed.. Probe lights up and off when putting something metal...

There are a few options available to get this to work. You likely have an NPN style sensor which means that you will need to add an external pull up....

> This really needs to be resolved and poor by BTT to just not answer... Doesn't give me any reason to buy their products when others such as FYSETC actually...

> If you look at https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/blob/master/Hardware/BIGTREETECH%20Octopus.pdf > you can see the pin "PROBE" on J40 is attached to an optocoupler EL357C with a 1k resistor. The optocoupler has a 1.4V...

> > > This really needs to be resolved and poor by BTT to just not answer... Doesn't give me any reason to buy their products when others such as...

> > > > > This really needs to be resolved and poor by BTT to just not answer... Doesn't give me any reason to buy their products when others...

> Can anyone share marlin config file with working probe settings please What kind of a probe are you using and where have you connected it. There is not just...

> Sorry, I use NPN type capacitive sensor that connected to j40 header. I will not use z min switch . Capacitive probe will be used for bed leveling and...