ariadne-bootloader
ariadne-bootloader copied to clipboard
loathingKernel
A little less unfinished TFTP bootloader for Arduino Ethernet or Arduino with Ethernet Shield
Greetings; I don't know how to contact the author to ask a question: Before I go flashing stuff, will this bootloader still work the regular way on my ArduinoIDE, so...
Hi, I did first a upload of the bootloader of Ariadne on a Atmega2560 (in fact, a controllino Mega). I did some modifications in spi.h, spi.c for pinout on the...
There are references to a 'hardware' folder which doesn't exist as well as the boards.txt and platform.txt not being inside the bootloaders folder and seemingly being unused. The old codebndr...
** Sorry in advance for the code blocks with no newlines, I can't seem to get them formatted properly..? ** Hey there, First off, everyone who has worked with this...
Is possible for the bootloader to start the program if the W5100 (W5200, ...) shield is not present? Currently, the program does not start if the card is not present,...
Hello, I use your ariadne bootloader with arduino mega 2560 and standard ethernet shield W5100. Now I have problem with upload this project. When I upload by USB cable standard...
I managed to get this bootloader installed but the reset server example sketch does not seem to work. I get no webpage served on port 80 (by typing in just...
Hi everyone. I have built a modular board to test different combinations of ATmega and Wiznet . Trying these combinations I have found an issue with TFTP transfers when trying...
the code below seem wrong to me. ARIADNE_SIGPOS which is the same as EEPROM_IMG_STAT from neteeprom.h, use as status, if the image uploaded by the booloader is OK or not....
_From @elik745i on March 30, 2017 14:22_ I'm getting endless reset after watchdog resets arduino (in the sketch I set it to 8sec as sketch is too big and it...
Metadata
Owner
Metadata
A little less unfinished TFTP bootloader for Arduino Ethernet or Arduino with Ethernet Shield